24 Jul 2010

Herstellung von green dragon Marihuana-Tinktur

So this is the MOST efficient one I've tried so far.

What you need is a metal sieve/strainer, a coffee grinder, a hair dryer, alcohol (100 proof minimum recommended, the stronger the better, Everclear is best, DO NOT USE RUBBING OR ISOPROPYL ALCHOHOL) an 8th or so of headies.

1.Put MJ on a tray with some foil in a oven at around 280 degrees (make sure it doesnt fluctuate over 310), have it in there for around 5 or 6 minutes, when it comes out it should be brownish like you vaped it half way and kind of crunchy. Dont heat it too much because it'd be similar to vaping all the THC away. This step is to turn THC-Acetate into regular Delta9THC.

2.Take the MJ and put it in your alcohol. You should add enough alcohol that the weed can be fully submerged and have some room to move as well. It doesn't really matter how much exactly you put in, just dont put in too little. Leave it in for about 30 minutes, also keep the top covered during that time and dont leave it in sunlight.

3.Take the mixture which should be a good hue of green out and pour it through the seive or strainer into any kind of glass bowl with a large surface area (for the alcohol to evaporate). After the liquid is through, take a glass object or some thing you can grind and squeeze with and squeeze it against the plant matter in the seive to get all the remaining liquid out as much as you can, the THC will mostly be concentrated here.

4.Now comes the part where you have to decide what you exactly want. There are three things you can create from this point on. Regular Green Dragon, which is a liquid emerald green mixture, and darker and browner tincture to put in spray bottles for sublingual (under the tongue) application, or honey oil which is basically resin that you can smoke or vaporize.

--------------------------------------

Green Dragon:

If you want to go the route of regular green dragon, take your container of mixture you squeezed and strained out and blow it indirectly with the hairdryer on the bottom of the container (dont blow into the mixture, just on the bottom of the container). If you have a decent hairdryer this will make it slightly hot and will start to evaporate the Alcohol. It's a good idea to have a quick read thermometer in the mixture to monitor tempertaure which shouldnt go above 160 to 170 degrees, keep it at or below that temp.

Do this until about 30 to 35 mL of solution remains. Put this solution in a closeable dark container. This is the final product, you can mix it with other drinks to make it palatable. A 4mL dose is more than enough for most tokers and will give you a great ride. Make sure you take it on an empty stomach though.

Tincture:

For this, you need to follow the same method above. The difference is that after about 30 to 40 mins of evaporating, you should take a sample with a eyedropper and hold it up to light (with a bowl underneath so you dont spill any precious liquid). After a while the stuff should seperate into alcohol and THC oil layers, the layers should be equal, if there is more alcohol (clearer and not brown) than oil than evaporate more until you get a half and half solution. This can be put in a candy spray bottle to discreetly get high sublingually. Basically spray 2 or 3 times under and over the tongue and suck on your tongue to get it to hit you quickly (20 mins). It'll get you blitzed.

Honey Oil:

This one your gonna have to heat it and evaporate almost all of the alcohol leaving you with pretty much pure oily THC resin. This can be smoked or vaporized (vaporized it tastes great). This is pretty straightforward, just continue the process until youve evaporated all alcohol.